Air release valve with isolation valve A-F-01
Quick Detail
Design standard: ANSI
Body material: cast iron GG25
Float ball: ABS
Isolation valve is Brass valve
Nominal diameter: 1″
Pressure: 125LBS 150LBS
End connection: NPT ANSI B1.20.1
Working temperature: -30℃~+120℃.
Test and inspection: API 598.
Epoxy Powder Coated inside and outside.
Peformance:
In the exhaust state, the pontoon pulls down one end of the lever due to the force of gravity. At this time, the lever is in a tilted state, and there is a gap in the contact part of the lever and the exhaust hole. Air is discharged from the exhaust hole through this gap. After the water level rises, the buoy floats upward under the action of the buoyancy of the water. The sealing end face on the lever gradually presses the exhaust hole until the entire exhaust hole is completely blocked. The exhaust valve is now completely closed.
Body material available: GG25/GGG40/cast/ductile iron/Stainless steel
Ball Material available: ABS or wood with Rubber/ Stainless steel
Size Range: 1-1/2″-6″ DN32-DN150
Pressure Range: PN16
Optional Ends: NPT BSPT male/Female, Flanged ends
Optional Design: Double Sphere ball
In the exhaust state, the pontoon pulls down one end of the lever due to the force of gravity. At this time, the lever is in a tilted state, and there is a gap in the contact part of the lever and the exhaust hole. Air is discharged from the exhaust hole through this gap. After the water level rises, the buoy floats upward under the action of the buoyancy of the water. The sealing end face on the lever gradually presses the exhaust hole until the entire exhaust hole is completely blocked. The exhaust valve is now completely closed.
Heating, boilers, solar water heaters, water supply systems, equipment support, etc.