GGG50 Tilting check valves with oil cylinder CV-H-001-1

GGG50 Tilting check valves with oil cylinder CV-H-001-1

Short Description:

Model No. CV-H-001-1

 China Tilting check valve manufacture supply ductile iron Tilting check valves with cylinder hydraulic DAMPER, ANSI 150LBS. Temperature: -30℃-+350℃


  • Feature

    Product Range:

    Performance:

    Application:

    Quick Detail

    Design standard: ANSI

    Body material: ductile iron

    Nominal diameter: 4”

    Pressure: 150LBS

    End connection: RF. Flange

    Face to face: EN558 Series 14

    Working temperature: -30~+350.

    Test and inspection: API 598.

    Eccentric disc Check Valve

    Connection: Flange ends conform to ASME B16.5 EN1092-1

    Epoxy powder coated inside and outside 250Microns

    FBE surface 250Mincrons.

     

    Product Range:

    Available Body Material: Cast Iron GG25, Ductile iron GGG40, GGG50

    Available Disc Material: Ductile iron, Bronze

    Optional Seat Ring: Brass, Bronze, SS304, SS316, EPDM

    Optional Design: DIN /BS/ ANSI with difference Face to face length

    Optional Ends: BS4504/EN1092-1 PN16/ ANSI B16.5 RF

    Size Range: DN100-DN1200 4”-48”)

    Pressure Range: PN10, PN16, PN20(150LBS)

    Optional surface color: RAL5002, RAL5015. RAL5005, red, black. Or customized

     

    Performance:

    Tilting Check Valve, while allowing the flow moving to the desired flow direction,

    stops the flow when exposed to back flow

     With the start of movement at defined flow direction on the system, the disc leaves the flow section by turning in its axis and allows the flow pass.

     When the flow stops, the disc sits on the machined sealing seat through by force of extra weight

     and maintains 100% tight sealing.

     The body and the disc can be manufactured as cast iron and ductile iron and sealing seats are manufactured from stainless steel

     Hydraulic brake system can be assembled to disc closer unit if it is required at project.

    The rate of closure can be controlled due to tilting check valve with hydraulic brake system and the system passes to

    .  static position slightly. The installation equipment protected from impact strength.

     

    Application:

    water, steam, oil, pumping system

     


  • Previous:
  • Next:

  • Available Body Material: Cast Iron GG25, Ductile iron GGG40, GGG50

    Available Disc Material: Ductile iron, Bronze

    Optional Seat Ring: Brass, Bronze, SS304, SS316, EPDM

    Optional Design: DIN /BS/ ANSI with difference Face to face length

    Optional Ends: BS4504/EN1092-1 PN16/ ANSI B16.5 RF

    Size Range: DN100-DN1200 4”-48”)

    Pressure Range: PN10, PN16, PN20(150LBS)

    Optional surface color: RAL5002, RAL5015. RAL5005, red, black. Or customized

     

    Tilting Check Valve, while allowing the flow moving to the desired flow direction,

    stops the flow when exposed to back flow

     With the start of movement at defined flow direction on the system, the disc leaves the flow section by turning in its axis and allows the flow pass.

     When the flow stops, the disc sits on the machined sealing seat through by force of extra weight

     and maintains 100% tight sealing.

     The body and the disc can be manufactured as cast iron and ductile iron and sealing seats are manufactured from stainless steel

     Hydraulic brake system can be assembled to disc closer unit if it is required at project.

    The rate of closure can be controlled due to tilting check valve with hydraulic brake system and the system passes to

    .  static position slightly. The installation equipment protected from impact strength.

     

    water, steam, oil, pumping system

    Write your message here and send it to us